Synthesis of catalysts

  • Planetary Ball Mill PM 100.
  • Two Rotary Evaporators (Heidolph Hei-VAP and BUCHI R-215).
  • Two drying ovens (Selecta 2001243 and Memmert UN55)  
  • Three calcination ovens (Carbolite HTF 1700, Energon HL-12/48 and Termolab MLM 1300).
  • Tubular oven (Iberfluid FK 1000)
  • Three DC LAB POWER SUPPLY.
  • Two laboratory fume hoods.
  • Four hydrothermal reactors.

Chemical reactors for catalytic processes

  • Four commercial automated lab reactors MicroActivity model (PiD Eng&Tech) which operate with flows in the range  from tens of ml/min to L/min, pressures ranging 1 to 100 bar, and reaction temperature ranges from room temperature to 1000 °C (using special material reactors – HASTELLOY C276 or SS-316).
  • Three homemade reaction systems specifically designed to perform different catalytic reactions such as methanation, WGS/rWGS or reforming of tars.
  • Three commercial stirred tank reactors for higher operating pressures (up to 345 bar) and temperaturas up to 350 °C.
  • One commercial chemical synthesis reactor from METTLER TOLEDO to achieve a precise control and maintains reaction temperature ensuring a reproducible process.
  • One homemade lab system for bath reactions.
  • Multi-reaction system ORBIT-6.

Materials Characterization

  • X-ray diffraction (Philips X´PERT PRO equipped with high-temperature chamber up to 1200 ºC) (ICMS).
  • Reflectometry and small angle X-ray spectroscopy (SAXS) for analyzing solid surfaces. [ICMS].
  • Raman spectroscopy (LabRAM Horiba Jobin Yvon with 3 excitation energies at 325 cm-1, 532 cm-1, and 785 cm-1). [ICMS].
  • UV-Vis-NIR spectrophotometer which operates in transmission mode or in diffuse reflectance. [ICMS].
  • Infrared spectrometer (JASCO FT/IR-6200 IRT-5000) with diverses accessories to operate in diffuse reflectance (DRIFT), attenuated total reflectance (ATR) or fixed-angle specular reflectance mode.
  • Physisorption analysis (TRISTAR II/TRISTAR II-Kr from Micromeritics equipped with automated three-station for surface area and porosity analysis). [ICMS].
  • X-ray photoelectron spectroscopy (XPS) for surface chemical analysis (Leybold – HerAeus LHS 10/20 model). High pressure and high temperature chamber for pretreatments. [ICMS].
  • High-resolution transmission electron microscopy (HRTEM) FEI TALOS S200S model equipped with a STEM detector in three operation modes (BF, ADF and HAADF), a CCD camera Ceta16M and an EDX analyzer for compositional analysis.
  • Scanning electron microscopy (SEM) HITACHI S4800 SEM-FEG equipped with a Bruker-X Flash-4010 EDX detector. [ICMS].
  • Pulse chemisorption measurements and temperature-programmed experiments (TPR, TPO, TPD, TPSR) with TCD detector and mass-spectrometer (MS) coupled.
  • Inductively coupled plasma atomic emission spectroscopy (ICP-AES) for chemical analysis. [ICMS].
  • Gas analyzer (ABB AO2020).
  • Three CO2 gas detectors (VAISALA).

In situ/operando techniques

  • Two quartz cells for in situ FTIR studies of probe molecules adsorption (CO, CO2, NH3, Pyr, etc.)
  • DRIFTS cell for operando studies under reaction conditions (900 ºC and 20 bar)
  • Sandwich cell for operando studies in transmission mode (400 ºC and 4 bar)
  • Linkam cell for catalytic studies in operando conditions by Raman spectroscopy
  • Linkam-adapted cell with fiber-optic coupled for UV-Vis operando measurements
  • Homemade FTIR gas cell for analysis under flow conditions
  • In situ DRIFTS cell specially designed for simultaneous infrared and conductance analysis of sensors.

Design & Manufacture of microreactors

  • 3D-Printer for additive manufacturing of flow devices, monoliths and microreactors.
  • Mechanical workshop for fabrication of a wide range of devices (teflon, aluminum or stainless Steel) and welding processes.
  • Preparation of slurries and rheological properties (viscometer, pH meter, isoelectric point and particle size).
  • Washcoating methods.

Cromatography methods

  • Three microGC equipped with two modules and two TCD detectors.
  • Two GC equipped with three modules and TCD/FID detectors.
  • High Performance Liquid Cromatography with refraction index detector.
  • High Performance Liquid Cromatography with automatic sampling (refraction index and UV detector).

 

Electrochemical devices

  • IVIUM Potenciostat
  • IVIUM RRDE Rotator